Press 160-ton

The 160 ton hydraulic press is industrial hydraulic equipment designed for applications that require high pressing force, stable operation, and precise control throughout the working cycle. This type of hydraulic press can be used for forming, bending, stamping, straightening, pressing, and other operations involving metal blanks and components.

When selecting a hydraulic press, rated force is not the only factor to consider. The cylinder stroke, working area, open height, operating speed, and drive power can all affect the suitability of the machine for a particular production process. For this reason, it is recommended to consider the workpiece material, dimensions, tooling requirements, and specific operation before selecting the final configuration.

The series is available in different configurations. The Y32-1600TA features a cylinder stroke of 1,000 mm, while the Y32-1600TB provides an 800 mm stroke. This gives manufacturers greater flexibility when selecting a configuration according to workpiece dimensions and tooling requirements.

• Hydraulic system with a working pressure of up to 25 MPa
• Heavy-duty frame designed for high-load applications
• Two configuration options: Y32-1600TA and Y32-1600TB
• Different cylinder strokes of 1,000 mm or 800 mm
• Large working area for oversized workpieces
• Rapid approach speed of up to 150–180 mm/s, depending on configuration
• Optional lower hydraulic ejector
• Motor power of 45 × 2 kW
• Configurable design for specific production requirements

The main frame is manufactured from high-strength structural steel designed to withstand substantial pressing forces. Its rigid construction helps maintain the overall geometry of the machine during operation and minimizes unwanted deformation under heavy loads.

The worktable is designed for installing dies, molds, and other production tooling. Its dimensions vary according to the selected press configuration. The hydraulic cylinder and main load-bearing components are manufactured and processed for continuous operation under high pressure.

The hydraulic system incorporates pumps, valves, piping, seals, and other components selected according to the machine's operating conditions. Proper component selection helps provide stable hydraulic pressure and smooth movement of the working cylinder during repeated production cycles.
For applications involving repetitive operations, this construction provides consistent movement of the working components and allows operators to control the main parameters of the pressing process.

Technical Note: The listed rated force of 16,000 kN corresponds to approximately 1,600 tons, not 160 tons. Please confirm the actual rated capacity before publishing this product page. If the intended capacity is 160 tons, the rated force should normally be approximately 1,600 kN.

One of the key advantages of this hydraulic press is its large working area. This is particularly useful for oversized workpieces, irregularly shaped components, or applications where additional space is required for installing dies and tooling.

Another advantage is the choice between two configurations. The Y32-1600TA has a 1,000 mm cylinder stroke, making it suitable for applications that require greater working travel. The Y32-1600TB has an 800 mm stroke but provides a larger working area of 2,000 × 2,000 mm, making it a practical option for larger workpieces and tooling.

The hydraulic drive system provides smooth cylinder movement and controlled pressing force throughout the working cycle. This is important not only for heavy-duty forming operations but also for maintaining consistent results during repeated production.

The equipment can also be configured according to specific manufacturing requirements. When selecting the machine, factors such as workpiece dimensions, production process, tooling, automation requirements, and operating conditions can be considered to create a more suitable configuration.

Hot Tags: press 160-ton, China press 160-ton manufacturers, suppliers, factory