Powder Metallurgy Press
Product Description
A powder metallurgy press is used to compact metal powders inside a die under controlled pressure, turning loose powder into a shaped green compact ready for further processing. It is a practical choice for manufacturers that need consistent dimensions, stable forming conditions, and repeatable results from one production cycle to the next.
The hydraulic design allows the pressing force to be applied smoothly and gives operators better control over the movement of the working slide. Depending on the part size and forming requirements, available models range from 200 to 3150 kN. Smaller presses can be used with compact dies and smaller components, while higher-capacity models provide the force and working space needed for larger parts.
When choosing a powder metallurgy hydraulic press, pressing capacity is only one part of the decision. Die dimensions, part height, required stroke, available working space, and production volume should also be considered. Based on these factors, the machine can be configured to fit the actual production process rather than simply selecting a press by tonnage.
Key Features
- Wide pressing force range - from 200 to 3150 kN for different powder forming applications.
- Smooth hydraulic operation - controlled slide movement helps apply pressure evenly during forming.
- Stroke up to 600 mm - suitable for dies and workpieces with different height requirements.
- Large open height - maximum open height reaches 1000 mm on the largest configuration.
- Different throat depths - available throat depth ranges from 230 to 360 mm depending on the model.
- Flexible working area - effective working width reaches up to 1000 mm, with a front-to-back depth of up to 700 mm.
- Motor options from 3 to 15 kW - drive power is matched to the pressing capacity and working conditions.
- Configurable design - key specifications and equipment configuration can be discussed according to the die and powder forming process.
Materials and Construction
Load-bearing components are manufactured from structural steel and undergo welding and subsequent machining. The working area is prepared for the installation of dies and other process tooling. Critical mating surfaces are machined to support proper alignment between major components and reliable mechanical operation.
The hydraulic system consists of an industrial-grade pump, cylinder, valves, piping, and sealing components. These parts are selected according to the required pressing force and operating conditions. The result is a machine that can handle regular production cycles while maintaining stable hydraulic movement and pressing performance.
Technical Parameters
|
Model |
Nominal Force (kN) |
Slider Stroke (mm) |
Max. Opening Height (mm) |
Effective Working Area L × W (mm) |
Motor Power (kW) |
|
Y32-100T |
1,000 |
260 |
440 |
640 × 550 |
5.5 |
|
Y32-150T |
1,500 |
260 |
350 |
640 × 550 |
5.5 |
|
Y32-200TA |
2,000 |
500 |
800 |
720 × 700 |
11 |
|
Y32-200TB |
2,000 |
500 |
800 |
1,000 × 1,000 |
11 |
|
Y32-250TA |
2,500 |
500 |
720 |
720 × 700 |
11 |
|
Y32-250TB |
2,500 |
500 |
800 |
1,200 × 1,100 |
15 |
|
Y32-315TA |
3,150 |
500 |
800 |
800 × 700 |
15 |
|
Y32-315TB |
3,150 |
600 |
700 |
1,000 × 1,000 |
18.5 |
|
Y32-315TC |
3,150 |
600 |
900 |
1,600 × 1,500 |
18.5 |
|
Y32-315TD |
3,150 |
800 |
1,250 |
1,700 × 1,100 |
22 |
|
Y32-500TA |
5,000 |
700 |
1,000 |
1,400 × 1,400 |
22 × 2 |
|
Y32-500TB |
5,000 |
700 |
1,000 |
3,000 × 2,200 |
22 × 2 |
|
Y32-630TA |
6,300 |
800 |
1,300 |
1,400 × 1,400 |
22 × 2 |
|
Y32-630TB |
6,300 |
700 |
1,200 |
3,000 × 2,200 |
22 × 2 |
|
Y32-800TA |
8,000 |
700 |
1,200 |
1,200 × 1,500 |
22 × 2 |
|
Y32-800TB |
8,000 |
800 |
1,200 |
3,200 × 2,200 |
22 × 2 |
|
Y32-1000TA |
10,000 |
800 |
1,500 |
1,500 × 1,300 |
30 × 2 |
|
Y32-1000TB |
10,000 |
1,000 |
1,500 |
3,000 × 2,500 |
30 × 2 |
|
Y32-1200T |
12,000 |
1,100 |
1,700 |
3,500 × 2,000 |
37 × 2 |
|
Y32-1600TA |
16,000 |
1,000 |
1,300 |
1,600 × 1,700 |
45 × 2 |
|
Y32-1600TB |
16,000 |
800 |
1,500 |
2,000 × 2,000 |
45 × 2 |
|
Y32-2000T |
20,000 |
1,000 |
1,300 |
1,600 × 1,800 |
45 × 2 |
Advantages of the Powder Metallurgy Press
Working space is another factor worth checking before placing an order. On the 3,150 kN model, the working area reaches 1,000 × 700 mm, while the maximum open height is 1,000 mm. This gives more room for larger dies, tooling, and components.
The hydraulic system is also well suited to controlled powder compaction. Instead of applying the load abruptly, the slide moves through the forming cycle in a controlled manner. This can be useful when the powder needs to be compacted evenly inside the die.
Motor power is matched to the different press capacities, ranging from 3 to 15 kW across the available models. This gives manufacturers more flexibility when balancing machine capacity, production requirements, and equipment configuration.
For customers who already have a die or a specific powder forming process, the machine can be discussed around those requirements. That may include pressing force, stroke, working area, die dimensions, and other configuration details.
Services
Before Ordering
We can help you determine the required pressing force and check whether the selected working area is suitable for your die. You can also discuss the forming process, part dimensions, and production requirements with our technical team before choosing a configuration.
- Pressing force selection
- Die size assessment
- Working area consultation
- Process discussion
- Machine configuration recommendations
Manufacturing & Quality Control
Each machine is manufactured and checked according to its specified configuration. Key structural, hydraulic, and drive components are inspected before the equipment is released for shipment.
- Steel frame manufacturing
- Main component inspection
- Hydraulic system testing
- Drive system testing
- Pre-shipment equipment inspection
After-Sales Support
After delivery, we can provide practical assistance with installation, commissioning, operation, and routine maintenance. Spare parts and technical advice are also available when needed.
- Installation assistance
- Operator guidance
- Technical consultation
- Spare parts supply
- Operation and maintenance recommendations
FAQ
Q: What is a powder metallurgy press used for?
A: A powder metallurgy press is mainly used to compact metal powders inside a die to produce shaped green compacts. The process is commonly used when manufacturers need repeatable part geometry and controlled compaction.
Q: How do I choose the right pressing force for powder compaction?
A: The required force depends on factors such as powder material, part size, die geometry, target density, and the forming process. For this reason, press capacity should be selected based on the actual application rather than the finished part size alone.
Q: What is the maximum pressing capacity available?
A: The largest model in this range has a rated force of 3,150 kN, equivalent to approximately 315 tons.
Q: Can the press be matched to our existing die?
A: Yes. We can evaluate the machine configuration according to your die dimensions and production requirements. Providing a part drawing, die dimensions, material information, and pressing process details will help with the selection.
Q: Is this press suitable for production runs?
A: Yes. The hydraulic design is suitable for regular pressing cycles. The appropriate model depends on the required production rate, part size, die configuration, and forming process.
Q: What information should I provide when requesting a quotation?
A: For a more accurate recommendation, please provide the powder material, part dimensions and weight, die dimensions, required pressing force, required stroke, and expected production volume. If available, a part drawing or die drawing is also helpful. Based on these details, we can recommend a suitable powder metallurgy hydraulic press configuration.
Hot Tags: powder metallurgy press, China powder metallurgy press manufacturers, suppliers, factory
Previous
Frame Type Hydraulic PressYou Might Also Like
Send Inquiry