Metal Deep-drawing Press
Product Description
A metal deep drawing press is designed for turning flat metal blanks into deeper, three-dimensional parts when ordinary bending or stamping is not enough. It pushes the sheet into a die in a controlled way, making it suitable for producing cups, housings, containers, covers, shells, and other formed metal components.
A hydraulic drive is a good fit for this type of work because the pressing force can be applied and controlled smoothly. The working stroke and other operating conditions can also be matched to the material and shape of the part. The available range covers rated forces from 200 to 3,150 kN, so customers can choose a machine based on the actual forming job rather than simply going for the largest model.
Besides deep drawing, the machine can also be used for forming, straightening, bending, pressing, and similar operations when the right tooling is installed. This makes it a practical choice for workshops that want one hydraulic press to handle more than one type of metalworking task.
Key Features
- Pressing force from 200 to 3,150 kN - suitable for different sizes of workpieces and forming requirements.
- Slide stroke up to 600 mm - gives the machine enough travel for deeper forming applications.
- Open height up to 1,000 mm - provides additional room for dies and larger tooling.
- Throat depth up to 360 mm - offers useful space around the forming area.
- Working area up to 1,000 × 700 mm - suitable for larger dies and metal blanks.
- Hydraulic drive system - provides smooth slide movement and controlled forming force.
- Motor options from 3 to 15 kW - different power levels are available across the range.
- Multi-purpose design - can also handle forming, straightening, bending, and pressing with suitable tooling.
Materials and Construction
The working area is designed for mounting dies, punches, and other forming tools. This is particularly important for deep drawing, where proper tool positioning can have a direct impact on the finished part. A well-matched die and punch setup also helps achieve more consistent forming results.
The power section consists of the main hydraulic cylinder and supporting hydraulic components. Major load-bearing parts are welded and machined to the required specifications, while the steel worktable is designed to support heavy tooling and metal blanks during production.
The right machine should be selected based on the actual part rather than press capacity alone. Material type, sheet thickness, blank diameter, finished-part depth, tooling design, and forming method all affect the required force. A smaller job may work well with a 600 kN or 1,000 kN press, while a larger or more demanding part may require considerably higher capacity.
Technical Parameters
|
Model |
Nominal Force (kN) |
Slider Stroke (mm) |
Max. Opening Height (mm) |
Effective Working Area L × W (mm) |
Motor Power (kW) |
|
Y32-100T |
1,000 |
260 |
440 |
640 × 550 |
5.5 |
|
Y32-150T |
1,500 |
260 |
350 |
640 × 550 |
5.5 |
|
Y32-200TA |
2,000 |
500 |
800 |
720 × 700 |
11 |
|
Y32-200TB |
2,000 |
500 |
800 |
1,000 × 1,000 |
11 |
|
Y32-250TA |
2,500 |
500 |
720 |
720 × 700 |
11 |
|
Y32-250TB |
2,500 |
500 |
800 |
1,200 × 1,100 |
15 |
|
Y32-315TA |
3,150 |
500 |
800 |
800 × 700 |
15 |
|
Y32-315TB |
3,150 |
600 |
700 |
1,000 × 1,000 |
18.5 |
|
Y32-315TC |
3,150 |
600 |
900 |
1,600 × 1,500 |
18.5 |
|
Y32-315TD |
3,150 |
800 |
1,250 |
1,700 × 1,100 |
22 |
|
Y32-500TA |
5,000 |
700 |
1,000 |
1,400 × 1,400 |
22 × 2 |
|
Y32-500TB |
5,000 |
700 |
1,000 |
3,000 × 2,200 |
22 × 2 |
|
Y32-630TA |
6,300 |
800 |
1,300 |
1,400 × 1,400 |
22 × 2 |
|
Y32-630TB |
6,300 |
700 |
1,200 |
3,000 × 2,200 |
22 × 2 |
|
Y32-800TA |
8,000 |
700 |
1,200 |
1,200 × 1,500 |
22 × 2 |
|
Y32-800TB |
8,000 |
800 |
1,200 |
3,200 × 2,200 |
22 × 2 |
|
Y32-1000TA |
10,000 |
800 |
1,500 |
1,500 × 1,300 |
30 × 2 |
|
Y32-1000TB |
10,000 |
1,000 |
1,500 |
3,000 × 2,500 |
30 × 2 |
|
Y32-1200T |
12,000 |
1,100 |
1,700 |
3,500 × 2,000 |
37 × 2 |
|
Y32-1600TA |
16,000 |
1,000 |
1,300 |
1,600 × 1,700 |
45 × 2 |
|
Y32-1600TB |
16,000 |
800 |
1,500 |
2,000 × 2,000 |
45 × 2 |
|
Y32-2000T |
20,000 |
1,000 |
1,300 |
1,600 × 1,800 |
45 × 2 |
Advantages
The available slide stroke also gives you more freedom when choosing tooling. For example, the Y41-315T has a 600 mm slide stroke and a 1,000 mm maximum open height, giving it considerably more room for larger dies and deeper forming applications.
There is also no need to use the largest machine for every job. The range starts at 200 kN and goes up to 3,150 kN, allowing manufacturers to choose a machine that better matches the size and difficulty of the workpiece. A smaller press can be a more practical option for lighter production, while higher-capacity models are available for larger and more demanding parts.
Another useful point is that the machine is not limited to deep drawing. With suitable dies and tooling, it can also be used for straightening, forming, bending, and pressing. For workshops handling different types of metalworking jobs, this can make the equipment more useful throughout the production process.
That said, press capacity is only one part of the selection process. The type of metal, sheet thickness, blank size, finished-part geometry, die dimensions, required drawing depth, and working cycle should all be considered before placing an order. Sharing these details with the technical team can help avoid choosing a machine that is either too small or unnecessarily oversized.
Services
Before Ordering
We help you select the right machine according to the actual part and production process. Our pre-sales support includes:
- Press force selection
- Material and blank size assessment
- Working area consultation
- Model recommendation
- Tooling discussion
- Machine configuration advice
If you have a part drawing, material information, sheet thickness, or forming requirements, you can send them to us for a more accurate recommendation.
Manufacturing & Quality Control
Each machine is checked before shipment, with attention given to the main mechanical and hydraulic components. The inspection process includes:
- Frame manufacturing and machining
- Main component inspection
- Hydraulic system testing
- Motor and electrical system checks
- Trial operation
- Final pre-shipment inspection
After-Sales Support
Our support continues after the machine arrives at your workshop. We can provide:
- Installation and commissioning assistance
- Operator guidance
- Remote technical support
- Spare parts supply
- Maintenance recommendations
- Troubleshooting assistance
FAQ
Q: What is a metal deep drawing press used for?
A: A metal deep drawing press is mainly used to form sheet metal blanks into deeper shapes such as cups, housings, containers, covers, and similar components. With suitable tooling, it can also be used for forming, straightening, bending, and pressing.
Q: How do I choose the right press force?
A: The required force depends on several factors, including the material and thickness of the sheet, blank size, finished-part dimensions, drawing depth, die design, and forming process. For this reason, press selection should not be based on tonnage alone.
Q: What is the highest-capacity model in this range?
A: The largest model listed is the Y41-315T, with a rated force of 3,150 kN and a 15 kW motor.
Q: What is the maximum slide stroke?
A: The maximum slide stroke in this range is 600 mm, available on the Y41-315T model.
Q: Can this hydraulic press be used for operations other than deep drawing?
A: Yes. With the appropriate tooling, the machine can also be used for forming, straightening, bending, pressing, and other metalworking operations.
Q: Can you recommend a press for a specific part?
A: Yes. For a more accurate recommendation, it is best to provide the part drawing, material, sheet thickness, blank dimensions, finished-part size, and required drawing depth. We can then evaluate the required pressing force and working parameters.
Hot Tags: metal deep-drawing press, China metal deep-drawing press manufacturers, suppliers, factory
You Might Also Like
Send Inquiry