Hydraulic Press 315T

The 315 ton hydraulic press from the T32 series is built for metalworking jobs that call for serious pressing force, a solid frame, and enough room for the workpiece and tooling. With a rated force of 3,150 kN, the machine can be used for pressing, forming, straightening, bending, fitting, stamping, and similar operations.
The T32 series includes four configurations: T32-315TA, T32-315TB, T32-315TC, and T32-315TD. All four models have the same 3,150 kN rated force and 25 MPa system pressure, but their working dimensions, slide stroke, operating speed, and motor power are different. This gives you more flexibility when choosing a machine for a particular part or production process.
For workshops that run pressing operations on a regular basis, choosing the right configuration can make a real difference. Instead of paying for working space or performance you may not need, you can select a model based on the actual size of your workpiece, tooling, required stroke, and production cycle.

• 3,150 kN rated pressing force for demanding metal forming and pressing applications.
• 25 MPa hydraulic system pressure for consistent force during the working cycle.
• Slide stroke from 500 to 800 mm, depending on the selected model.
• Maximum open height up to 1,250 mm for applications requiring more tooling space.
• Working areas up to 1,700 × 1,500 mm for larger workpieces and dies.
• Four configurations allow the machine to be matched to different production requirements.
• Different pressing and return speeds help adapt the machine to the required working cycle.
• Motor power from 15 to 22 kW, depending on the configuration.
• Hydraulic drive system for smooth slide movement and controlled pressing force.

The frame of the 315 ton hydraulic press is made from heavy-duty structural steel selected for high-load applications. A rigid frame is important for this type of machine because it helps keep the structure stable when the press is working under substantial force.
The worktable provides a solid surface for dies, molds, fixtures, and other tooling. Since the four T32 configurations have different working areas, customers can choose a table size that fits their workpieces instead of working around unnecessary space limitations.
The hydraulic system consists of the main cylinder, pump, valves, piping, seals, and other industrial components. These parts work together to control cylinder movement and maintain the required hydraulic pressure throughout the pressing cycle.
The overall construction also takes into account the areas that receive the highest loads. Key structural parts, connection surfaces, and working components are properly machined and assembled to support reliable operation during repeated production.

One of the biggest advantages of the T32 series is the choice between four different machine configurations. All models deliver 3,150 kN of pressing force, but the working dimensions and operating characteristics vary considerably.

The T32-315TA is the more compact option, with an 800 × 700 mm working area and a 15 kW motor. It can be a good fit for workshops that need 315-ton pressing capacity without a particularly large working table.

For applications that require more room, the T32-315TC offers a 1,600 × 1,500 mm working area and a 600 mm slide stroke. It gives operators more space for larger workpieces and tooling.

The T32-315TD goes a step further with an 800 mm slide stroke and a maximum open height of 1,250 mm. Its 1,700 × 1,100 mm working area makes it a practical choice when both workpiece size and tooling clearance are important.

Speed is another point worth considering. Depending on the model, working speed ranges from 14 to 20 mm/s, while return speed ranges from 69 to 120 mm/s. The right choice therefore depends on more than just the nominal pressing force.

Whether you need a machine for general pressing, metal forming, straightening, bending, or work with larger blanks, the 315 ton hydraulic press can be configured around the job. Before ordering, it is worth checking the workpiece size, die dimensions, required stroke, open height, and desired production cycle.

Hot Tags: hydraulic press 315t, China hydraulic press 315t manufacturers, suppliers, factory