Hydraulic Ceramic Press
Product Description
A hydraulic press for ceramics is designed for pressing and forming ceramic materials, blanks, and molded parts where even pressure and consistent dimensions are important. It is a practical choice when manual pressing or lower-capacity equipment is no longer enough for the production process.
When working with ceramics, press capacity is only one part of the equation. The size of the mold, workpiece height, required slide stroke, and available working space all affect the final equipment selection. For this reason, our range covers pressing capacities from 200 to 3150 kN, giving manufacturers more flexibility when matching a machine to a specific product or mold.
This ceramic hydraulic press can be used for pressing powder materials, forming ceramic blanks, and other applications that require controlled force. The right configuration should be selected according to the material, mold design, product dimensions, and production requirements.
Key Features
- Multiple pressing capacities - available from 200 to 3150 kN for different ceramic forming applications.
- Smooth slide movement - the hydraulic drive allows controlled movement without sudden changes during pressing.
- Different stroke options - slide stroke ranges from 260 to 600 mm depending on the model.
- Large opening height - maximum open height reaches up to 1000 mm on the largest configuration.
- Different working areas - choose a compact setup for smaller molds or a larger work area for bigger ceramic blanks.
- Practical throat depth - available throat depths range from 230 to 360 mm, providing convenient tooling access.
- Various motor options - motor power ranges from 3 to 15 kW depending on the selected model.
- Application-specific configuration - operating parameters and optional equipment can be discussed according to the customer's production process.
Materials and Construction
The machine frame is built from durable structural steel and designed to handle the forces generated during pressing. A rigid welded structure helps maintain stability under load, while critical surfaces are machined after fabrication to support accurate assembly.
The working area provides space for mounting the ceramic mold and positioning the blank. This is particularly important in ceramic production, where mold dimensions can vary significantly from one product to another. A properly sized work area makes mold installation easier and leaves enough room for the complete pressing cycle.
The hydraulic system consists of the main cylinder, pump, valves, piping, seals, and other components selected according to the capacity of each machine. The system transfers the required force to the slide and allows the operator to control the pressing movement smoothly.
The mold itself also plays an important role in the final result. Its dimensions, material, and design need to match the ceramic product and the selected press. For this reason, providing mold drawings or product information before ordering can help us recommend a more suitable configuration.
Technical Parameters
|
Model |
Nominal Force (kN) |
Slider Stroke (mm) |
Max. Opening Height (mm) |
Effective Working Area L × W (mm) |
Motor Power (kW) |
|
Y32-100T |
1,000 |
260 |
440 |
640 × 550 |
5.5 |
|
Y32-150T |
1,500 |
260 |
350 |
640 × 550 |
5.5 |
|
Y32-200TA |
2,000 |
500 |
800 |
720 × 700 |
11 |
|
Y32-200TB |
2,000 |
500 |
800 |
1,000 × 1,000 |
11 |
|
Y32-250TA |
2,500 |
500 |
720 |
720 × 700 |
11 |
|
Y32-250TB |
2,500 |
500 |
800 |
1,200 × 1,100 |
15 |
|
Y32-315TA |
3,150 |
500 |
800 |
800 × 700 |
15 |
|
Y32-315TB |
3,150 |
600 |
700 |
1,000 × 1,000 |
18.5 |
|
Y32-315TC |
3,150 |
600 |
900 |
1,600 × 1,500 |
18.5 |
|
Y32-315TD |
3,150 |
800 |
1,250 |
1,700 × 1,100 |
22 |
|
Y32-500TA |
5,000 |
700 |
1,000 |
1,400 × 1,400 |
22 × 2 |
|
Y32-500TB |
5,000 |
700 |
1,000 |
3,000 × 2,200 |
22 × 2 |
|
Y32-630TA |
6,300 |
800 |
1,300 |
1,400 × 1,400 |
22 × 2 |
|
Y32-630TB |
6,300 |
700 |
1,200 |
3,000 × 2,200 |
22 × 2 |
|
Y32-800TA |
8,000 |
700 |
1,200 |
1,200 × 1,500 |
22 × 2 |
|
Y32-800TB |
8,000 |
800 |
1,200 |
3,200 × 2,200 |
22 × 2 |
|
Y32-1000TA |
10,000 |
800 |
1,500 |
1,500 × 1,300 |
30 × 2 |
|
Y32-1000TB |
10,000 |
1,000 |
1,500 |
3,000 × 2,500 |
30 × 2 |
|
Y32-1200T |
12,000 |
1,100 |
1,700 |
3,500 × 2,000 |
37 × 2 |
|
Y32-1600TA |
16,000 |
1,000 |
1,300 |
1,600 × 1,700 |
45 × 2 |
|
Y32-1600TB |
16,000 |
800 |
1,500 |
2,000 × 2,000 |
45 × 2 |
|
Y32-2000T |
20,000 |
1,000 |
1,300 |
1,600 × 1,800 |
45 × 2 |
Advantages
One of the biggest benefits of this hydraulic press for ceramics is the range of available capacities. Not every ceramic product needs a very high pressing force. Smaller products may work well with a 200 or 400 kN model, while larger or denser blanks may require 1000, 2000, or 3150 kN.
The available slide stroke is another point worth considering. For example, the Y41-315T provides a 600 mm slide stroke and a maximum open height of 1000 mm. This gives manufacturers considerably more room when working with larger molds or taller blanks.
Working area also changes with the machine configuration. The smaller models provide a working area of 520 × 420 mm, while the 3150 kN model offers 1000 × 700 mm. This makes it easier to match the machine to the actual mold size rather than choosing a press based only on its nominal capacity.
For ceramic manufacturers, the practical approach is to look at several factors together: pressing force, mold dimensions, slide stroke, open height, and working area. Choosing the machine this way can help avoid paying for unnecessary capacity while still leaving enough room for the intended production process.
Services
Before Ordering
- Model selection based on the ceramic application
- Pressing force recommendations
- Review of ceramic blank dimensions
- Mold size and compatibility check
- Working area and stroke selection
- Discussion of customized configurations
Manufacturing & Quality Control
- Fabrication of the frame and main components
- Component quality inspection
- Hydraulic system testing
- Motor and electrical system testing
- Complete working-cycle test
- Pre-shipment inspection
After-Sales Support
- Equipment installation assistance
- Operator guidance
- Technical consultation
- Remote setup support
- Spare parts supply
- Maintenance recommendations
FAQ
Q: Can this press be used for ceramic products?
A: Yes. The machine can be used for pressing and forming ceramic materials when the appropriate mold and operating parameters are selected for the specific application.
Q: How do I choose the right pressing force for ceramic materials?
A: The required force depends on the ceramic material, product size and shape, mold design, required forming pressure, and production cycle. If you are not sure which capacity you need, you can send us a product drawing or basic application details for an initial recommendation.
Q: Which model is suitable for smaller ceramic blanks?
A: For smaller products, the Y41-20T, Y41-40T, or Y41-60T can be considered. The final choice depends on the mold dimensions, material characteristics, and required forming force.
Q: Is there a model for larger ceramic products?
A: Yes. The Y41-315T provides a 3150 kN rated force, a 1000 × 700 mm working area, a 600 mm slide stroke, and a maximum open height of 1000 mm, making it suitable for applications requiring more working space and higher pressing capacity.
Q: Can the press configuration be customized?
A: Yes. Machine parameters and optional equipment can be discussed according to the product size, mold design, material, and production process.
Q: What information should I provide when requesting a ceramic press?
A: A product or mold drawing is the most useful starting point. It is also helpful to provide the ceramic material, blank dimensions, mold size, required pressing cycle, and expected production output. With this information, we can recommend a suitable industrial hydraulic press for ceramics.
Hot Tags: hydraulic ceramic press, China hydraulic ceramic press manufacturers, suppliers, factory
Previous
Automatic Powder PressYou Might Also Like
Send Inquiry